Single chip Low-pin-count USB 2.0 to 10/100M Fast Ethernet controller

1.33

1.08

1.34

1.14

2.02

Yes, all AX88772A Windows 10/8.x7/Vista/XP 32-bit/64-bit drivers were qualified by Microsoft WHQL certification.

Yes, the AX88772C/AX88772B/AX88772A/AX88760/AX88772 USB dongles with ASIX's default VID/PID are supported by Windows 8 inbox drivers directly.

No, the AX88772A EEPROM content includes important hardware initialization data like USB descriptors, product strings, serial number, etc. This configuration data will be used during the AX88772A's hardware initialization for normal operation.

No, the AX88772A doesn't support the MII interface. In this case, you can implement AX88172A with MII interface on your target application. Please contact ASIX's sales (sales@asix.com.tw) for further support.

Yes, AX88772A demo board was certified by USB-IF.

Yes, every Ethernet device must have a unique MAC address. You should always assign a unique MAC address in the AX88772A EEPROM.

No, it depends on the real requirement of your AX88772A target application. If your end customer may need to install more than one AX88772A-based device on your target application, you should assign a different serial number in the EEPROM for every AX88772A device. If your target application always uses one AX88772A device, you can consider assigning the same serial number in the EEPROM for every AX88772A device for easy maintenance in mass production, especially if you plan to use a Windows PC to test AX88772A based devices repeatedly during the mass production test.

It depends on your product applications and target market which may vary case by case. Below are some general guidelines on whether one can use ASIX's VID/PID or use its own registered VID/PID. 1. Case where it is OK to use ASIX Electronics's VID (0B95h) and PID (772Ah): (1) Your AX88772A-based application works with the standard AX88772A drivers provided by ASIX without any modification to the driver. (2) You are not concerned from a business and product marketing perspective about sharing the same VID and PID on your products as ASIX's other customers. (*Note) Please inform ASIX by emailing us at sales@asix.com.tw beforehand if you would like to use ASIX Electronics VID and PID for your products. *Note: This can avoid your end customers from downloading the standard AX88772A driver from the ASIX website which may not be compatible with your device drivers. 2. Cases requiring you to use your own VID and PID (1) Your AX88772A based application system doesn't work with the AX88772A standard drivers released on this website and your target application system (such as USB dongle or docking station) allows end customers to update the standalone AX88772A driver by themselves after sales. In this case, you MUST assign your own unique VID and PID to your AX88772A based devices. (2) For brand name products, you probably don't want your AX88772A-based devices to be compatible with other companies' AX88772A-based devices. In this case, you should consider assigning your own unique VID and PID for your AX88772A based devices. You can register your own VID from USB Implementers Forum, Inc. and define the PID based on your company rules. If you have any problems, please contact ASIX's sales (sales@asix.com.twa>) for further support.

No, AX88772A doesn’t support Windows Surface RT 8.0/8.1 driver.

The answer depends on whether the USB host controller supports the S4/S5 wake-up function or not since the WOL function of AX88772A USB to LAN devices should be supported on both AX88772A and the USB host controller. Many USB host controllers don't support the WOL function in S4 (Hibernate)/S5 (Shutdown) mode.

No, it could not be done by end users. To install AX88772A Linux driver on your Android tablet PC, you have to recompile AX88772A Linux driver source on your target Android tablet platform and then you can install the compiled AX88772A Linux driver on your Android platform. It can only be done by the manufacturer of your Android tablet PC. Please contact the support guys of the manufacturer for further support if necessary.

AX88772A supports some default settings inside chip hardware to enable it to communicate with USB host controller during enumeration when the AX88772A EEPROM is blank (prior to being programmed). The default settings inside chip facilitate users to update the EEPROM content through a Windows PC during R&D validation process or program a blank EEPROM mounted on target system PCB during manufacturing process. ASIX Electronics provides a Windows SROM Programming tool for users to easily program the Serial EEPROM of AX88772A on a typical Windows XP/2000 PC. This AX88772A WinXP/2K SROM Programming Tool supports to customize the MAC address, Serial Number, Vendor ID and Product ID, etc. for AX88772A based application systems in mass production. Alternatively, users can pre-program the blank EEPROM on a 3rd Party Universal Programmer before soldering the EEPROM onto the AX88772A application device. It is recommended that users assign a unique MAC address in the EEPROM for every AX88772A device. Also if users plan to use a Windows PC to test AX88772A-based devices repeatedly during mass production, it is recommended that the same serial number be assigned to the EEPROM for every AX88772A device. However, a different serial number should be assigned in the EEPROM for every AX88772A device if users need to install more than one AX88772A device on the same platform. Please contact ASIX's sales (sales@asix.com.tw) to get the AX88x72A EEPROM User Guide for more details.

Please try to un-install the existing installed AX88772A driver firstly and then re-install the latest AX88772A macOS driver to improve this kind of issue. For macOS 10.13 or above systems, please double check if you have set the "Allow apps downloaded from" option on the ”Security & Privacy” console to "App Store and identifier developers" to allow loading the newly-installed third-party kernel extensions (KEXTs).

You can open the gerber files of AX88772A demo board by running ORACLE's AutoVue Evaluation Revision tool (30 days evaluation date). Please visit ORACLE's web site for more details.

You can open the PowerPCB PCB layout file of AX88772A demo board by running Mentor Graphics PADS Layout Product Evaluation Software (No time limitation but with limited function). Please visit Mentor Graphics' web site for more details.

The 12MHz/25MHz crystal signals of AX88772A board should be winthin (12MHz +- 50ppm)/(25MHz +- 50ppm) respectively. Please refer to Section 3 of AX88x72A USB-to-LAN Application Design Note for the detailed 12MHz/25MHz crystal circuits information. You can download it from AX88772A Application Design & Layout Guide Download web page directly.

The reference Ethernet transformer on the AX88772A demo board is the Bothhand LU1S041X LF (Turns Ratio 1CT:1CT, Auto-MDIX) single RJ-45 connector module with integrated 10/100 BASE-TX magnetic. Please refer to Section 4 of AX88x72A USB-to-LAN Application Design Note for the detailed Ethernet magnetic circuit information. You can download it from AX88772A Application Design & Layout Guide Download web page directly.

AX88772A supports 16-bit mode 93C56 or 93C66 EEPROM.

Please visit the AX88772A Driver Download web page for details.

Select the "Properties" of "My Computer" to check if your Windows system is 32-bit or 64-bit system. If your system is 64-bit system, you should see the "64-bit" string in the Windows system information such as "Microsoft Windows XP 64-bit Edition", otherwise it should be a 32-bit Windows system. Users should download the correct AX88772A Windows driver (32-bit or 64-bit) for their respective Windows 32-bit or 64-bit system.

All ASIX's AX88772A standard drivers are qualified with ASIX's AX88772A demo board with AX88772A default Vendor ID (0B95h) and Product ID (772Ah). Some of AX88772A manufacturers have their own Vendor ID and Product ID on their AX88772A applications. In this case, ASIX's AX88772A standard drivers will not work with your AX88772A device. Please contact the technical support of your AX88772A device manufacturer to obtain a proper driver.