USB 3.2 Gen1轉Gigabit超高速乙太網路控制晶片

USB 3.2 Gen1轉Gigabit超高速乙太網路控制晶片

亞信電子USB 乙太網路 iPXE 解決方案，將先進的iPXE網路啟動技術整合到亞信最新USB乙太網路晶片產品應用中，提供用戶更強大、更靈活、與高效率的iPXE網路啟動再進化新體驗。

亞信電子AX88179A USB 3.2 Gen1轉超高速乙太網路晶片解決方案，可以為輕薄短小的筆記型電腦、智慧手機、平板電腦、遊戲機等智慧連網設備，提供一個高速穩定、簡單設計、容易使用、高性價比的有線連網最佳解決方案。

1.23

1.31

1.00

2.07

1.01

1.00

1.00

1.09

2.00

1.05

2.30

1.04

1.02

2.30

2.00

1.00

Yes, the AX88179 Windows 10/8.x/7 32-bit/64-bit drivers were qualified by Microsoft WHCK certification and the AX88179 Windows XP/Vista 32-bit/64-bit drivers were qualified by Microsoft WHQL certification.

Yes, please deliver your own AX88179 schematic and PCB layout files to ASIX's Support (support@asix.com.tw) for further review before making your own AX88179 PCB board.

The AX88179 supports a 64-byte eFuse that is a one-time programming ROM for an alternate solution to store the required hardware configuration data in production. We strongly suggest customers to reserve the EEPROM location on AX88179 PCB board for flexible designs even if you plan to use the AX88179 eFuse for hardware configuration. Please refer to AX88179 EEPROM User Guide for details.

Yes, AX88179 demo board was certified by USB-IF.

Yes, every Ethernet device must have a unique MAC address. Users should always assign a unique MAC address in the AX88179 EEPROM for every AX88179 based devices.

No, it depends on the real requirement of your AX88179 target application. If users need to install more than one AX88179 based devices on your target application, you should assign a different serial number in the EEPROM for every AX88179 device. If your target application always uses one AX88179 device, you can consider assigning the same serial number in the EEPROM for every AX88179 device for easy maintenance in mass production, especially if you plan to use a Windows PC to test AX88179 based devices repeatedly during mass production test.

No, the AX88179 already supports available device drivers for most of operating systems such as Windows 10/8.x/7/Vista/XP, Linux, Mac OSX, WinCE/Mobile, etc. Please visit AX88179 Driver Download web page for details. For some special OS supporting requirements, please contact ASIX's sales (sales@asix.com.tw) for further support.

The answers to above questions really depend on user's product applications and target market, which can be different on individual cases. Below gives customers some general guidelines about whether one can use ASIX's VID/PID or one should better register its own one with USB-IF. 1.Case where it is OK to use ASIX Electronics's VID (0B95h) and PID (1790h): You may be able to use ASIX Electronics' VID and PID when your AX88179 based application system can simply work with AX88179 standard drivers provided by ASIX without any modification and you don't have any concern from business and product marketing perspective to use the same VID and PID on your products as ASIX's other customers who are also using ASIX's VID and PID. ASIX Electronics would like to request customers to inform ASIX sales staffs by sending us email at sales@asix.com.tw beforehand if you would like to use ASIX Electronics VID and PID for your products. 2.Cases requiring you to use your own VID and PID (1) Your AX88179 based application systems can't work directly with AX88179 standard drivers which ASIX Electronics release on its web site and your target application system (such as USB dongle or docking station) may allow your end customers to update the standalone AX88179 driver by themselves after sales. In that case, you MUST assign your own unique VID and PID for your AX88179 based devices. (2) For brand name products, you probably don't want your AX88179 based devices to become compatible with other company's AX88179 based devices. In this case, you should consider assigning your own unique VID and PID for your AX88179 based devices. You can register your own VID from USB Implementers Forum, Inc. and define the PID based on your company rules.

No, AX88179 doesn’t support Windows Surface RT 8.0/8.1 driver.

No, it could not be done by end users. To install AX88179 Linux driver on your Android tablet PC, you have to recompile AX88179 Linux driver source on your target Android tablet platform and then you can install the compiled AX88179 Linux driver on your Android platform. It can only be done by the manufacturer of your Android tablet PC. Please contact the support guys of your Android platform manufacturer for further support if necessary.

AX88179 supports some default settings inside chip hardware to enable it to communicate with USB host controller during enumeration when the AX88179 EEPROM is blank (prior to being programmed). The default settings inside chip facilitate users to update the EEPROM contents through a Windows PC during R&D validation process or program a blank EEPROM or eFuse during manufacturing process. ASIX Electronics provides Windows/Linux SROM programming tools for users to easily program AX88179 EEPROM or eFuse on a typical Windows/Linux platforms. These AX88179 SROM programming tools support to customize the MAC address, Serial Number, Vendor ID and Product ID, etc. for AX88179 based application systems in mass production. Alternatively, users can pre-program the blank EEPROM on a 3rd Party Universal Programmer before soldering the EEPROM onto the AX88179 application device. You MUST assign a unique MAC address in the EEPROM for every AX88179 device. Please refer to AX88179 EEPROM User Guide for more detailed EEPROM/eFuse design notes.

Please try to un-install the existing installed AX88179 driver firstly and then re-install the latest AX88179 macOS driver to improve this kind of issue. If you still have problems, please refer to Section 4 of AX88179 macOS driver installation guide in the driver package to isolate your issue. For macOS 10.13 or above systems, please double check if you have set the "Allow apps downloaded from" option on the ”Security & Privacy” console to "App Store and identifier developers" to allow loading the newly-installed third-party kernel extensions (KEXTs).

You can open the gerber files of AX88179 demo board by running ORACLE's AutoVue Evaluation Revision tool (30 days evaluation date). Please visit ORACLE's web site for more details.

You can open the PowerPCB PCB layout file of AX88179 demo board by running Mentor Graphics PADS Layout Product Evaluation Software (No time limitation but with limited function). Please visit Mentor Graphics' web site for more details.

The reference Ethernet transformer on the AX88179 demo board is the Bothhand LA1S109-43 (Turns Ratio 1CT:1CT, Auto-MDIX) single RJ-45 connector integrated 10/100/1000M Base-T magnetic. Please refer to AX88179 USB 3.0 to Gigabit Ethernet Application Design Note for details.

The 25MHz crystal signals of AX88179 board should be winthin 25MHz +- 30ppm. Please refer to AX88179 USB 3.0 to Gigabit Ethernet Application Design Note for details.

The AX88179 supports 3.3V to 5V 16-bit mode 93C56/93C66 serial EEPROM. Please refer to AX88179 USB 3.0 to Gigabit Ethernet Application Design Note for details.

Please register MyASIX membership and then download the latest AX88179 datasheet, reference schematic, gerber/PCB layout files and application design note from AX88179 Product web page directly.

Please visit the AX88179 Driver Download web page

You can easily download the AX88179 Windows 10, 8.x, 7, Vista or XP 32-bit/64-bit WHCK/WHQL drivers setup programs from AX88179 Driver Download web page and then run the setup program to install a proper AX88179 Windows driver on your Windows machine directly.

All ASIX's AX88179 standard drivers are qualified with ASIX's AX88179 demo board with AX88179 default Vendor ID (0B95h) and Product ID (1790h). Some of AX88179 manufacturers have their own Vendor ID and Product ID on their AX88179 applications. In this case, ASIX's AX88179 standard drivers will not work with your AX88179 device. Please contact the technical support of your AX88179 device manufacturer to obtain a proper driver.

亞信電子將於2024年10月7日至11日，在日本東京「IEEE ISPCS 2024研討會」展示其最新的AX88279/AX88179B USB PTP硬體時間戳解決方案。

如何解決macOS 10.15第三方設備驅動程序安裝問題？ macOS 10.15支持新的Gatekeeper安全功能，以確保Mac上僅運行受信任的軟件。在首次打開下載的軟件之前，macOS需要獲得您的批准，以確保您不會誤執行非預期的惡意軟件。 安裝亞信電子產品macOS 10.15驅動程式，用戶必須手動在macOS系統偏好設置中的"安全與隱私控制台"中點擊解鎖圖標並允許“ ASIX ELECTRONICS CORPORATION”開發人員軟件可以正常安裝驅動程式。

亞信電子推出最新一代免驅動（Driverless）USB超高速乙太網路晶片—【AX88179B USB 3.2 Gen1轉Gigabit超高速乙太網路控制晶片】，提供客戶一個隨插即用（Plug and Play）的USB轉超高速乙太網路晶片解決方案，無需煩人的驅動程式下載與安裝步驟，從而優化客戶的連網體驗。

這個影片展示亞信電子最新的USB乙太網路iPXE解決方案。這個方案可以支援亞信最新的USB乙太網路晶片‚包括AX88279、AX88179B/AX88179A/AX88179與AX88772E/AX88772D。

這個影片展示亞信電子最新的USB乙太網路iPXE遠端開機解決方案。這個方案可以支援亞信最新的USB乙太網路晶片‚包括AX88279、AX88179B/AX88179A/AX88179與AX88772E/AX88772D。

亞信USB乙太網路macOS 11.3及以上版本驅動程式可支援亞信電子AX88179/AX88178A/AX88772C/AX88772B USB乙太網路卡。

任天堂Switch無法使用Wi-Fi連上網路或覺得網路速度太慢~怎麽辦? 任天堂Switch本身已支援亞信電子AX88179/AX88772 USB乙太網路卡驅動程式,因此插上亞信USB乙太網路卡即可獲得穩定的有線連網品質並可大幅提升上網速率。