ASIX Electronics Corporation Notice USB to LAN products 
Dear Customer:

If you got some problems on ASIX USB to LAN products, please download the How to identify authentic ASIX USB to LAN Products document to double check if your USB to LAN device includes an Non-authentic ASIX USB to LAN solution inside or not? If yes, please contact the manufacturer of your USB to LAN device to get proper drivers instead. ASIX DOES NOT GUARANTEE AND PROVIDE ANY SUPPORT FOR THOSE NON-AUTHENTIC ASIX PRODUCTS.

  Yes, I understand.   
 
USB to LAN products content USB to LAN products
 
ASIX
  
>>繁體中文
>>简体中文
Best viewed at 1024x768 with IE 8.0 or above or Mozilla Firefox or Google Chrome
ASIX About ASIX ASIX News ASIX Products Contact ASIX Join ASIX ASIX Support MyASIX ASIX Vedio  
You are guest
| Login |
 
Embedded Ethernet ICs
    Non-PCI Gigabit Ethernet
    Non-PCI Fast Ethernet
    MII/RMII Fast Ethernet
SuperSpeed USB-to-LAN ICs
    USB 3.0 to Gigabit Ethernet
    USB 2.0 to Gigabit Ethernet
    USB 2.0 to Fast Ethernet
Embedded Network/USB SoCs
    Embedded Wi-Fi SoC
    Embedded Ethernet SoC
    USB KVM Switch SoC
I/O Connectivity ICs
    PCIe Bridge
    PCI Bridge
    USB Bridge
   RS-232/RS-485 Transceivers
      5V RS232 Transceiver
      3V RS232 Transceiver
      5V RS485 Transceiver
      3V RS485 Transceiver
    EL Drivers
Embedded Wireless Modules
    Embedded Wi-Fi Modules
    Embedded Bluetooth Modules
title_image_prod_IO.jpg
title_image_prod_Interface_Transceivers.jpg
Home >> Products >> I/O Connectivity ICs >> RS-232/RS-485 Transceivers >> 5V RS485 Transceiver >> ZT490E

 ZT490E -- Low Power 5V 10Mbps RS485 Transceivers (Features 8-pin, Full Duplex)

The ZT485E series devices are 5V differential data line transceivers for RS485/RS422 communication that consist of one driver and one receiver with high level of ESD protection. They are designed for balanced transmission lines interface that meet ANSI standard TIA/EIA-485-A and ISO 8482:1987(E) specifications.

The ZT485E series devices span out with half or full duplex, data rate guaranteed at 250K bit per second or 10Mbps, and allow one unit load that fan out 32 devices sharing a common bus. The I/Os are enhanced-electrostatic discharge (ESD) protected, exceeding ±15kV Human Body Model (HBM).

Feature:

  • Meets or exceeds the requirements of ANSI Standard TIA/EIA-485-A and ISO 8482:1987(E) specifications for Vcc at +5V ±10%
  • Low quiescent current - 0.5mA typ., 1mA max
  • Low shutdown current (where applicable) - 1μA typical, 10μA max
  • Guaranteed standard data rate 250Kbps or 10Mbps
  • True Fail-Safe (Open and Short) Receiver
  • -7V to +12V common-mode input voltage range
  • Half-Duplex or Full-Duplex configuration
  • Allows up to 1 unit load (32 devices) on the same common bus
  • Controlled driver output slew rate and receiver input filtering
  • Active-high driver enable and active-low receiver enable
  • ESD Protection on bus terminals
    • ±15kV Human Body Model (HBM)
  • Drop-in Replacements for MAX483E, MAX485E, MAX488E, MAX489E, MAX490E, MAX491E
  • High fanout driving 1/8 unit load (256 devices) available on the ZT485H Series
Target Applications:
  • RS-422/RS-485 communications
  • Utility meters
  • Industrial process control
  • Building automation
  • Level translators
  • Transceivers for EMI-sensitive applications
  • Routers and HUBs
  • Industrial-controlled Local Area Networks
  • Industrial PCs, embedded PCs and peripherals

 Pin Configuration and Application Diagram

ZT490E_Pin_Configuration.jpg

 Selection Guide

IO_5V_RS485_Selection_Guide.jpg

Technical Documentation

 Product Brief, Product Introduction and Datasheet

ZT490E Brief134.4 KB2015-04-30
Download
ZT490E Datasheet 2 MB2017-09-05
Login MyASIX

[Terms of Use]    [Sitemap]
Copyright © 2013-2017 ASIX Electronics Corporation All Rights Reserved.