MCS7832 -- Low-Pin-Count USB 2.0 to 10/100M Fast Ethernet Controller
The MCS7832 USB to 10/100 Ethernet Controller is a unique solution to interface 10/100 Base-T Ethernet devices to the Universal Serial Bus (USB-2.0). This device has been specifically designed to provide a simple, low cost solution to communicate with applications needing plug-and play 10/100 Ethernet connectivity with minimal design time. This is accomplished by its highly integrated functionality, robust software suite, WHQL and USB-IF certification, low pin-count and high performance. It provides internal buffering to enable parallel operations from USB ports on the host side, and MAC ports on the Ethernet side. It also provides a serial interface for an EEPROM for storing the MAC-ID, VID, PID, and other configurable settings.
規格:
USB 2.0 Device Controller
Supports HS (480Mbps) and FS (12Mbps) modes
USB Specification 2.0 Compliant
Integrated USB 2.0 Hi-Speed PHY
Supports all USB Standard Commands
Supports Five Vendor Specific Commands
Supports USB Suspend/Resume Detection Logic
High Performance 10/100 Mbps Ethernet Controller
Integrated 10/100 MAC and PHY
Fully compliant with IEEE 802.3 Specification
Supports Full Duplex Operation in 10/100 Mbps Modes
Exhaustive MAC Status Reporting
Supports PAUSE Control Frames
Supports various low power Mode
Suite of robust, software drivers for major operating systems
Serial Interface to Read/Write to EEPROM through USB
On-Chip FIFOs for Upstream and Downstream Data Transfers
WHQL Compatible hardware
Configurable Vendor and Product ID's through EEPROM
Supports iSerial Number and Locally Administered Network Address
Can ASIX help me to review my own MCS7832/MCS7830 schematic and PCB layout?
A0002:
Yes, please deliver your own MCS7832/MCS7830 schematic and PCB layout files to ASIX's Support (support@asix.com.tw) for further review before making your own MCS7832/MCS7830 PCB board.
